Making, mastering and mixing beats are all slightly different aspects of one skillset. All of these skills can be learned and improved over time. Just sit back, relax, and pay close attention to the details explained in this article. After reading through this write-up, you will be able to make your own beats, master it and mix it as well. However, you need to be careful not to focus only on the beat. While the beat is the foundation of your song, you must make sure that your vocals and rhythm are on par. This is because you can always purchase your desired beat from a site like ours, but you can’t purchase your vocals. This article is a good place to start. So, here you will learn how to make beats, how to master beats and how to mix beats as well.

How to Make Beats

Making a beat is not rocket science. Anything and everything can be learned with a little bit of determination. When you want to make a beat, besides knowledge, you need two basic things. These are:

  • Hardware. You need hardware to make a beat. If you just want to set up a small and simple music studio where can make beats, you could make do with a laptop. A keyboard and drum midi controller would be helpful upgrades once you progress in your musical career. If you want to go more professional, you might need a few more things.
  • Software. Aside from the hardware requirement, you also need beat-making software. There are several pieces of software for making beats that you can buy online. You can go for anyone with the features that you require. Some of the most popular beat-making software is Garage Band, Adobe Audition, and Beat Maker. It is easier to begin making beats than ever before thanks to the new technology in the field.

Where to Begin as You Make Your Beat

So, where do you begin when you want to make a beat? This is a question frequently asked by aspiring music producers, especially newbies and even some experienced ones. There is actually no specific answer to this question. It’s best to begin from your particular goals, and build your process around them. What works for you and your goals will continue to work, so you will not need to continually adapt your workflow. The steps that you take from the beginning to the end are referred to as your workflow. The fundamental parts of a beat-making workflow are:

  • The rhythm
  • The accompaniment
  • The lead melody
  • The transition
  • Proper arrangement

How to Mix Beats

Mixing can be dicey sometimes. This is because even as a professional, you can be caught in the web of mixing forever if you are not careful. It will take a lot of time to learn mixing, but you will only get better over time. Take note that before you commence mixing, you need to backup your original song. Make sure that you do not edit your only copy. This is because you will lose the original song when you start mixing. You cannot get the original file back after it has been mixed. As a music producer, make sure that you have a good mastery of mixing before you move into another phase of music production. Sometimes, plugins and filters are used in mixing. Some examples of these plugins are EQ and Compression. These plugins permit you to either make your sound fit into your beat or make the sound stand out from it.

Steps to Take in Mixing

  • First, do not bother yourself with the mixing at the initial stage. What you first need to do is make the beat and assign each sound to a channel of the mixer in order to make adjustments to the volumes.
  • Adjust the volumes to understand whether there is an area you need to improve upon.
  • When you make use of the earlier mentioned plugins (EQ and Compression), make sure to only change one variable at a time. Keep your volume the same before and after, so that you can hear a clear comparison. This very step is sacrosanct for you not to muddle everything up.
  • After the mix is comfortably completed, click “Stop.” Then, play what you have just mixed while you move away from the speaker. Sometimes, being physically further from the sound allows you a better way to listen to what you made. After listening to the full sound, determine if you are comfortable with what you are hearing. If so, then the job is done, but if not, then you have to start the steps again.

How to Master Your Beats

After finishing with the mixing of your song, the next thing to do is to master your song. Mastering is the process by which the result of your mixing is amplified. Amplification is not the whole of mastering, but it is a large part of it. 

There is a major difference between mixing and mastering. Mixing allows your sound or beat to be balanced, and clear. This can be done by carefully adjusting each mixer tracker volume, using software (Compression and EQ) and every other effect such as distortion, chorus, and delay. Mastering will make your beat louder, crisper, sharper and add finishing touches to your beat. 

Tools Necessary in Mastering

Just like the other steps in creating a beat, mastering requires some software and tools. Some of the tools that are generally used for mastering your beat are clipper, compressor, Linear Phase EQ, a limiter and more. When you have a mastering chain, there will be a massive or a master result. This depends to a very large extent on professional experience and taste as well. The mastering chain has everything to do with the order in which the effects on your final master channel are being arranged to give a masterful result. The limiter is always the final plugin to be used with a meter to generate the desired reading. Hence, mastering takes a lot of trial and error coupled with a lot of professional experience developing a sophisticated ear to know when a beat is successfully mastered.

Making Beats on the Web

In learning how to make beats, how to master beats and how to mix beats, technology has made almost everything simpler including beat making. By enabling you to make beats online, it means that you can make your beat anywhere in the world. It is good to note that there are a lot of websites that you can visit to make your beats online. When you want to make your beats online, you do not have to download or buy any software. You do not even have to make use of any plugin. You can make beats for almost any genre. Some of the websites that you can use to make your beats on the web are Soundation and SoundTrap. As a starter in beat or music production, this will enable you to minimize expenses if any.

Buying Beats

Sometimes, you just don’t have the time or desire to create your own beats. After all, you also have to worry about your brand, your vocals, and your community. Creating beats might just not be something you have time for. If this is the case, don’t worry! At EnmassMusic, we have a wide catalog of both exclusive and non-exclusive beats that you can purchase to use for your songs. We work with veterans of the music industry to deliver you beats that you wouldn’t have had the ability to make on your own. You can browse through our catalog here, or browse by genre.

Digital Audio Workstation

A Digital Audio Workstation is a full-fledged software for your home studio. This workstation will provide everything you need to make your music without requiring expensive hardware. Digital Audio Workstations are more capable, powerful and robust than ordinary software for making beats. Generally, beat-making software is only used for making beats and instrumentals since that is the only purpose for which it is designed. But to go beyond making beats and instrumentals, you need a Digital Audio Workstation to reconcile the recording of your vocals, arrangement of songs, and mixing and mastering of your beats. Different Digital Audio Workstations can be purchased to best suit your needs. Some of the Digital Audio Workstations available in the market for purchase are:

  • Logic Pro X
  • Cubase 10
  • Pro Tools 2018
  • Presonus StudioOne

Sampling and Playing Live

When you want to make a beat or song, there are generally two ways to go about it. You may decide to make music from scratch by playing live instruments, or you may decide to use samples. Sampling has been made very popular by the rise of the hip hop genre. 

Sampling involves taking a part of an existing beat or song, from your own catalog or someone else’s, and making some minor adjustments to it so that it can become an entirely new beat or song. While you do this, make sure that you are wary of the copyright that is associated with the original sample.

The other method of making a beat or song is to play a live beat or song from scratch. Whether you play the live instrument from a midi controller or programming notes into a sequencer, what it means is that you are actually building or making your beat from scratch and there will, therefore, be no copyright issues. A very good and experienced beat or music professional will be able to make use of these two methods convincingly, effectively and efficiently.


Making, mixing, and mastering your own beats does not need to be difficult. It is a time-consuming process, but it allows you to have control over every aspect of your music production. By using the power of modern technology, you can create your beats without the need for any musical instruments or instrumental talent. Of course, if you don’t feel comfortable creating your own beats, or simply don’t have the time, you can always buy them from a company such as EnmassMusic.